SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918  SW4X4@COX.NET

The most common way to identify a differential or axle type is by the cover gasket 

that is used between the housing and the cover. 

Below is a quick guide to help you determine the type that you are working on.

PLEASE CALL US IF YOU HAVE SOMETHING DIFFERENT OR OLDER 
WE CAN HELP YOU WITH ANY REAR END 1-800-653-5918  602-468-0022
SW4X4@COX.NET

CHRYSLER AMC
FORD
GM
TOYOTA
DANA
 
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

Gasket

Differential/Axle Type

Application


REAR END DESCRIPTION

    AMC 20/JEEP

Common
AMC/Jeep

AMBASSADOR 68-74

MARLIN 69
RAMBLER 69
REBEL 69
SCRAMBLER 76-86
SPIRIT V8 79
AMX:  1968 - 1970  (Rear)
CJ5:  1976 - 1983  (Rear)
CJ7:  1976 - 1986  (Rear)
CJ8:  1981 - 1986  (Rear)
Concord:  1978 - 1979  (Rear)
Hornet:  1970 - 1977  (Rear)
J10:  1976 - 1986  (Rear)
Javelin:  1967 - 1974  (Rear)
Matador:  1971 - 1978  (Rear)
Pacer:  1975 - 1980  (Rear)
Wagoneer:  1979 - 1986  (Rear)

American General
93-04 Hummer H1

H1:  1992 - 2006  (Front)
H1:  1992 - 2006  (Rear)
SPECIFICATIONS:
• RG DIAMETER 8.875"
• 8 7/16" X 20 RH THREADED BOLTS
• PINION DIAMETER 1.625" 28 SPLINES
Perfectly round rear cover with 12 cover bolts. Has bolt in axles which are a 2 piece design from the factory.
  Ring Gear Diameter:  8.875
  Cover Bolts:  12
  Ring Gear Bolts:  8
  axle Spline Count:  29
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8
  Carrier Breaks:  2.73 / 3.08
• CASES: 2.73 & NUMERICALLY LOWER
3.08 & NUMERICALLY HIGHER
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

   CHRYSLER 7.25"

Dodge
63-76 Dart
63-72 Valiant

Plymouth
65-72 Barracuda
73-73 Plymouth Duster
75-80 Volare

ASPEN 76-80

CORDOBA 75-83
DAKOTA (F) 87-96
DAKOTA (R) 87-96

FIFTH AVENUE 80-89
IMPERIAL 77-89
LEBARON 75-83
MIRADA 77-82
NEW YORKER 77-89
NEWPORT 77-89
ST. REGIS 77-83

Belvedere:  1963 - 1970  (Rear)
Challenger:  1970 - 1974  (Rear)
Charger:  1966 - 1978  (Rear)
Coronet:  1963 - 1976  (Rear)
Dakota:  1987 - 1998  (Rear)
Dakota:  1987 - 1998  (Rear)
Diplomat:  1977 - 1989  (Rear)
Durango:  1998 - 1998  (Rear)
Durango:  1998 - 1998  (Rear)
Duster:  1970 - 1976  (Rear)
Fifth Avenue:  1983 - 1989  (Rear)
Fury:  1966 - 1978  (Rear)
Imperial:  1977 - 1983  (Rear)
Magnum:  1978 - 1983  (Rear)
Monaco:  1965 - 1979  (Rear)
New Yorker:  1977 - 1982  (Rear)
SPECIFICATIONS:
  Ring Gear Diameter:  7.250"
• 8 3/8" x 24 LH THREADED BOLTS
• PINION DIAMETER 1.375" 27 SPLINES
•
9 or 10 bolts on rear cover with 7.25" ring gear, commonly a c/clip axle however there was a bolt in application up until 1981. The 9 bolt rear uses a different case and spider assembly which is not compatible with new components.
  Ring Gear Diameter:  7.250"
  Cover Bolts:  10
  Ring Gear Bolts:  8
  axle Spline Count:  25

  Carrier Breaks:  2.47 / 2.76
  CASES: 2.47 & NUMERICALLY LOWER  2.76 & NUMERICALLY HIGHER
   

   CHRYSLER 8 IFS

Dodge
02-Up TRUCK RAM 1500 (Front)
00-Up Dakota and Durango (Front)

Liberty:  2006 - 2011  (Front)		SPECIFICATIONS:
• RG DIAMETER 7 9/16”
• 8 3/8 X 24 RH THREADED BOLTS
• PINION DIAMETER 1.406 26 SPLINES
•
Chrysler 8.0" IFS, '00 ON
   Ring Gear Diameter:  8.000
  Cover Bolts:  10
  Ring Gear Bolts:  10
  AXLE Spline Count:  29
 
  CASE 3.31 & DOWN - 3.54 & UP
  Carrier Breaks:  none
  Rear Suspension:  
  
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

   CHRYSLER 8.25

CHRYSLER® & JEEP® 8.25” & 8.375” STYLE

Dodge
69-Up B100, B150
69-Up B200, B250
86-Up W100, W150
Jeep
89-Up Cherokee
82-Up Dakotas
Chrysler/Dodge
70-Up Passenger Cars

PASSENGER
CARS,VARIOUS 73-97
B100, 150, 200, 250 69-ON
B,D,W-100 66-97
B,D,W-200 66-97
B,D,W-300 66-97
ASPEN/VOLARE 76-80
BARRACUDA 70-74
CHALLENGER 70-74
CHARGER/CORONET 73-76
CHEROKEE 97-01
CHRYSLER® 87-ON
CHRYSLER 300 72-79
CORDOBA 75-83
DAKOTA 87-ON
DAKOTA 90-97
DART 72-76
DIPLOMAT/LEBARON 77-83
DURANGO 98-ON
DUSTER 73-76
FIFTH AVE. 80-89
FURY 70-81
IMPERIAL 71-83
LIBERTY 02-ON
MIRADA/MAGNUM 78-83
NEWORT 72-73
NEW YORKER 72-88
POLAR/SATELLITE 70-74
ST. REGIS 79-81
W100, 150 86-ON
TRUCK 1/2 TON 69-96
TRUCK 1/2 TON RAM 97-ON
B1500 Dodge Van 1/2 Ton:  1996 - 1998  (Rear)
B2500 Dodge Van 3/4 Ton:  1997 - 1998  (Rear)
Dakota:  1997 - 2008  (Rear)
Dakota:  1997 - 2008  (Rear)
Durango:  1998 - 2008  (Rear)
Durango:  1998 - 2008  (Rear)
Grand Cherokee :  2005 - 2010  (Rear)
Grand Cherokee :  2005 - 2010  (Rear)
Liberty:  2002 - 2011  (Rear)
Liberty:  2002 - 2011  (Rear)
Nitro:  2007 - 2011  (Rear)
Nitro:  2007 - 2011  (Rear)
Nitro:  2007 - 2011  (Rear)
Ram 1500 1/2 Ton:  1997 - 2010  (Rear)
Ram 2500 3/4 Ton:  1997 - 2001  (Rear)
Ram Van 1500 1/2 Ton:  1997 - 2003  (Rear)
Ram Van 2500 3/4 Ton:  1997 - 2003  (Rear)
XJ Cherokee:  1997 - 2001  (Rear)
XJ Sport:  1997 - 2001  (Rear)

B100 Dodge Van 1/2 Ton:  1976 - 1980  (Rear)
B150 Dodge Van 1/2 Ton:  1981 - 1994  (Rear)
B1500 Dodge Van 1/2 Ton:  1995 - 1996  (Rear)
B250 Dodge Van 3/4 Ton:  1981 - 1994  (Rear)
B2500 Dodge Van 3/4 Ton:  1995 - 1996  (Rear)
Comanche:  1991 - 1992  (Rear)
Coronet:  1976 - 1976  (Rear)
D100 2wd 1/2 Ton:  1976 - 1979  (Rear)
D150 2wd 1/2 Ton:  1976 - 1993  (Rear)
D200 2wd 3/4 Ton:  1975 - 1980  (Rear)
Dakota:  1987 - 1996  (Rear)
Dakota:  1987 - 1996  (Rear)
Dart:  1976 - 1976  (Rear)
Diplomat:  1977 - 1989  (Rear)
Duster:  1976 - 1976  (Rear)
Fifth Avenue:  1983 - 1989  (Rear)
Fury:  1976 - 1978  (Rear)
Imperial:  1977 - 1983  (Rear)
Magnum:  1978 - 1983  (Rear)
Monaco:  1976 - 1979  (Rear)
New Yorker:  1976 - 1982  (Rear)
Ram 1500 1/2 Ton:  1994 - 1996  (Rear)
Ram 1500 1/2 Ton:  1994 - 1996  (Rear)
Ram Charger:  1976 - 1993  (Rear)
Ram Van 1500 1/2 Ton:  1976 - 1996  (Rear)
Ram Van 2500 3/4 Ton:  1976 - 1996  (Rear)
Road Runner:  1976 - 1980  (Rear)
W150 1/2 Ton 4x4:  1977 - 1993  (Rear)
XJ Cherokee:  1991 - 1996  (Rear)
XJ Sport:  1991 - 1996  (Rear)



A100 1/2 Ton:  1964 - 1971  (Rear)
B100 Dodge Van 1/2 Ton:  1970 - 1975  (Rear)
Barracuda:  1964 - 1974  (Rear)
Belvedere:  1968 - 1970  (Rear)
Charger:  1968 - 1978  (Rear)
Coronet:  1963 - 1975  (Rear)
D100 2wd 1/2 Ton:  1970 - 1975  (Rear)
D200 2wd 3/4 Ton:  1970 - 1975  (Rear)
Dart:  1966 - 1975  (Rear)
Duster:  1970 - 1975  (Rear)
Fury:  1966 - 1975  (Rear)
GTX:  1968 - 1971  (Rear)
Imperial:  1971 - 1975  (Rear)
Monaco:  1966 - 1975  (Rear)
New Yorker:  1968 - 1975  (Rear)
Polara:  1960 - 1974  (Rear)
Ram Van 1500 1/2 Ton:  1970 - 1975  (Rear)
Ram Van 2500 3/4 Ton:  1971 - 1975  (Rear)
Road Runner:  1968 - 1970  (Rear)
Satellite:  1965 - 1974  (Rear)
SPECIFICATIONS:
• RG DIAMETER 8.25"
• 10 3/8" X 24 LH THREADED BOLTS
• PINION DIAMETER 1.626" 27 SPLINES
•
Chrysler 8.25", '
  Ring Gear Diameter:  8.250
  Cover Bolts:  10
  Ring Gear Bolts:  10
  Spline Count:  27
 
  CASE: 2.71 & NUMERICALLY HIGHER
  Carrier Breaks:  2.47 / 2.56
  Rear Suspension:  
  
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

   CHRYSLER 8.75

    741 CASE

Chrysler

Dodge

B200/B250 65-68
BARRACUDA 64-68
BELVIDERE/300 57-68
CHARGER (DAYTON) 66-68
CONCORD/MONACO/
POLARA 63-68
DART/SWINGER 66-68
FURY/IMPERIAL/
TOWN & COUNTRY 57-68
ROAD RUNNER/
SATELLITE 67-68
SUPER BEE 68
VALIANT 60-68
W100/2150 65-68

B100 Dodge Van 1/2 Ton:  1970 - 1973  (Rear)
B200 Dodge Van 3/4 Ton:  1970 - 1973  (Rear)
Barracuda:  1964 - 1973  (Rear)
Belvedere:  1963 - 1970  (Rear)
Catalina:  1961 - 1973  (Rear)
Challenger:  1970 - 1973  (Rear)
Charger:  1968 - 1973  (Rear)
Coronet:  1963 - 1973  (Rear)
D100 2wd 1/2 Ton:  1961 - 1973  (Rear)
D200 2wd 3/4 Ton:  1961 - 1973  (Rear)
Dart:  1961 - 1973  (Rear)
Duster:  1970 - 1972  (Rear)
Fury:  1961 - 1973  (Rear)
GTX:  1967 - 1971  (Rear)
Imperial:  1961 - 1973  (Rear)
Monaco:  1965 - 1973  (Rear)
New Yorker:  1961 - 1973  (Rear)
Polara:  1961 - 1973  (Rear)
Ram Van 1500 1/2 Ton:  1961 - 1973  (Rear)
Road Runner:  1968 - 1973  (Rear)
Satellite:  1965 - 1972  (Rear)
W100 1/2 Ton 4x4:  1957 - 1973  (Rear)
W200 3/4 Ton 4x4:  1957 - 1973  (Rear)

SPECIFICATIONS:
• 10 BOLT THIRD MEMBER
• RG DIAMETER 8.75"
•
• PINION DIAMETER 1.375" 29 SPLINES
• 741 STYLE CASTING • STRAIGHT PINION
• CASE: NO CASE BREAKS

Chrysler 8.75", 41 Case Housing
Chrysler 8.75", 41 Case Housing. 1 3/8" pinion shaft diameter.
  Ring Gear Diameter:  8.750
  Cover Bolts:  
  Ring Gear Bolts:  12 - 3/8" X 24 LH THREADED BOLTS
  AXLE Spline Count:  30
  Dropout:  THIRD MEMBER
  Pinion Support:  False
  Carrier Breaks:  none
  Rear Suspension:  Solid
  Pinion Nut Size: 

   CHRYSLER 8.75



    742 CASE

Chrysler

Dodge


B200/B250 65-68
BARRACUDA 64-68
BELVIDERE/300 57-68
CHALLENGER 68
CHARGER (DAYTON) 66-68
CONCORD/MONACO/
POLARA/CORONET 63-68
DART/SWINGER 66-68
FURY/IMPERIAL/
TOWN & COUNTRY 57-68
NEW YORKER 57-68
NEWPORT 57-68
ROAD RUNNER/
SATELLITE 68
SUPER BEE 68
TRUCK 1/2 TON 57-68
TRUCK 3/4 TON 65-68
VALIANT 60-68
W100/2150 65-68

B100 Dodge Van 1/2 Ton:  1970 - 1973  (Rear)
B200 Dodge Van 3/4 Ton:  1970 - 1973  (Rear)
Barracuda:  1964 - 1973  (Rear)
Belvedere:  1963 - 1970  (Rear)
Catalina:  1961 - 1973  (Rear)
Challenger:  1970 - 1973  (Rear)
Charger:  1968 - 1973  (Rear)
Coronet:  1963 - 1973  (Rear)
D100 2wd 1/2 Ton:  1961 - 1973  (Rear)
D200 2wd 3/4 Ton:  1961 - 1973  (Rear)
D300 2wd 1 Ton:  1962 - 1968  (Rear)
Dart:  1961 - 1973  (Rear)
Duster:  1970 - 1970  (Rear)
Fury:  1961 - 1973  (Rear)
GTX:  1967 - 1971  (Rear)
Imperial:  1961 - 1973  (Rear)
Monaco:  1965 - 1973  (Rear)
New Yorker:  1961 - 1973  (Rear)
Polara:  1961 - 1973  (Rear)
Ram Van 1500 1/2 Ton:  1961 - 1973  (Rear)
Road Runner:  1968 - 1973  (Rear)
Satellite:  1965 - 1970  (Rear)
W200 3/4 Ton 4x4:  1962 - 1969  (Rear)

Chrysler 8.75", 42 Case Housing. 1 3/4" pinion shaft diameter.

SPECIFICATIONS:
• 10 BOLT THIRD MEMBER
• RG DIAMETER 8.75"
• PINION DIAMETER 1.750" 10 SPLINES
• 742 STYLE CASTING • STRAIGHT PINION

  Ring Gear Bolts:  12 -3/8" X 24 LH THREADED BOLTS
  AXLE Spline Count:  30
  Dropout:  THIRD MEMBER
  Rear Suspension:  Solid
• CASE: NO CASE BREAKS

SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

   CHRYSLER 8.75

   489 CASE

Chrysler     Dodge
B200-B250 69-74
BARRACUDA/
CHARGER (DAYTONA) 69-74
BELVIDERE 69-70
CHALLENGER 69-74
MODEL YEAR
CHRYSLER® 300 69-73
CORONET 69
DART/SWINGER 69-72
DUSTER 70-74
FURY/VALIANT 69-74
MODEL YEAR
IMPERIAL/
TOWN & COUNTRY 69-74
MONACO/POLARA 69-74
NEWPORT/ NEW YORKER 69-74
SATELLITE 69-74
MODEL YEAR
ROADRUNNER 74-93
SUPER BEE 69-70
TRUCK 1/2 TON 68-74
TRUCK 3/4 TON 69-74
W100/W150 69-74

B100 Dodge Van 1/2 Ton:  1970 - 1973  (Rear)
B200 Dodge Van 3/4 Ton:  1970 - 1973  (Rear)
Barracuda:  1964 - 1973  (Rear)
Belvedere:  1963 - 1970  (Rear)
Catalina:  1961 - 1973  (Rear)
Challenger:  1970 - 1973  (Rear)
Charger:  1968 - 1973  (Rear)
Coronet:  1963 - 1973  (Rear)
D100 2wd 1/2 Ton:  1961 - 1973  (Rear)
D200 2wd 3/4 Ton:  1961 - 1973  (Rear)
Dart:  1961 - 1973  (Rear)
Duster:  1970 - 1973  (Rear)
Fury:  1961 - 1973  (Rear)
GTX:  1967 - 1971  (Rear)
Imperial:  1961 - 1973  (Rear)
Monaco:  1965 - 1973  (Rear)
New Yorker:  1961 - 1973  (Rear)
Polara:  1961 - 1973  (Rear)
Ram Van 1500 1/2 Ton:  1961 - 1973  (Rear)
Road Runner:  1968 - 1973  (Rear)
Satellite:  1965 - 1973  (Rear)
W200 3/4 Ton 4x4:  1969 - 1973  (Rear)

Chrysler 8.75", 89 Case Housing 1 7/8" pinion shaft diameter.

SPECIFICATIONS:

• 10 BOLT THIRD MEMBER
• 489 STYLE CASTING# • TAPERED PINION
• RG DIAMETER 8.75"
• PINION DIAMETER 1.875" 29 SPLINES
• CASES: NO CASE BREAKS
   Ring Gear Diameter:  8.750
  Ring Gear Bolts:  12 - 3/8" X 24 LH THREADED BOLTS
  AXLE Spline Count:  30
  Dropout:  THIRD MEMBER
  Carrier Breaks:  none
  Rear Suspension:  Solid

             CHRYSLER FRONT 9.25
Power Wagon:  2005 - 2010  (Front)
Ram 1500 1/2 Ton:  2006 - 2010  (Front)
Ram 2500 3/4 Ton:  2003 - 2010  (Front)
Ram 3500 1 Ton:  2003 - 2010  (Front)


Chrysler 9.25" Front
Chrysler 9.25" straight axle front. Has 14 bolt front cover.
  Ring Gear Diameter:  9.250
  Cover Bolts:  14
  Ring Gear Bolts:  12
  AXLE Spline Count:  33
  Carrier Breaks:  none
  FRONT Suspension: STRAIGHT AXLE

SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    CHRYSLER 9.25     REAR

Dodge74-Up Ramcharger74-Up D300, D35074-Up W100, W15074-Up W200, W25084-Up B350

B350 84-ON
CHARGER 74-76
CORDOBA 75-81
D300/D350 74-ON
DAKOTA W/V8 98-ON
MODEL YEAR
DURANGO 98-ON
FIFTH AVENUE 80-81
FURY 73-81
IMPERIAL 74-75
MONACO 75-85
MODEL YEAR
NEWPORT 73-81
NEW YORKER 72-81
POLARA 70-74
RAMCHARGER 74-93
TRAILDUSTER 74-ON
MODEL YEAR
TRUCK 1/2 TON 74-ON
TRUCK 3/4 TON 74-ON
TRUCK 1 TON 74-2000
W100/W150/W200/W250 74-ON

B100 Dodge Van 1/2 Ton:  1970 - 1980  (Rear)
B150 Dodge Van 1/2 Ton:  1981 - 1994  (Rear)
B1500 Dodge Van 1/2 Ton:  1995 - 1998  (Rear)
B200 Dodge Van 3/4 Ton:  1970 - 1981  (Rear)
B250 Dodge Van 3/4 Ton:  1981 - 1994  (Rear)
B2500 Dodge Van 3/4 Ton:  1995 - 1998  (Rear)
B300 Dodge Van 1 Ton:  1970 - 1980  (Rear)
B350 Dodge Van 1 Ton:  1981 - 1994  (Rear)
B3500 Dodge Van 1 Ton:  1995 - 1998  (Rear)
Challenger:  1973 - 1974  (Rear)
Charger:  1968 - 1979  (Rear)
D100 2wd 1/2 Ton:  1970 - 1979  (Rear)
D150 2wd 1/2 Ton:  1976 - 1993  (Rear)
D200 2wd 3/4 Ton:  1967 - 1980  (Rear)
D250 2wd 3/4 Ton:  1974 - 1993  (Rear)
D300 2wd 1 Ton:  1974 - 1980  (Rear)
D350 2wd 1 Ton:  1981 - 1989  (Rear)
Dakota:  1997 - 2000  (Rear)
Dakota:  1997 - 2000  (Rear)
Diplomat:  1977 - 1989  (Rear)
Durango:  1998 - 2000  (Rear)
Durango:  1998 - 2000  (Rear)
Fury:  1971 - 1978  (Rear)
GTX:  1967 - 1971  (Rear)
Imperial:  1974 - 1981  (Rear)
Magnum:  1978 - 1983  (Rear)
Monaco:  1966 - 1979  (Rear)
New Yorker:  1970 - 1982  (Rear)
Polara:  1973 - 1973  (Rear)
Ram 1500 1/2 Ton:  1994 - 2000  (Rear)
Ram 1500 1/2 Ton:  1994 - 2000  (Rear)
Ram 2500 3/4 Ton:  1994 - 2000  (Rear)
Ram Charger:  1974 - 1993  (Rear)
Ram Van 1500 1/2 Ton:  1974 - 2000  (Rear)
Ram Van 2500 3/4 Ton:  1974 - 2000  (Rear)
Ram Van 3500 1 Ton:  1978 - 1993  (Rear)
Road Runner:  1973 - 1980  (Rear)
W150 1/2 Ton 4x4:  1977 - 1993  (Rear)
W200 3/4 Ton 4x4:  1969 - 1980  (Rear)
W250 3/4 Ton 4x4:  1981 - 1993  (Rear)
W300 1 Ton 4x4:  1974 - 1980  (Rear)
W350 1 Ton 4x4:  1981 - 1989  (Rear)
Dakota:  2001 - 2008  (Rear)
Dakota:  2001 - 2008  (Rear)
Durango:  2001 - 2008  (Rear)
Durango:  2001 - 2008  (Rear)
Ram 1500 1/2 Ton:  2001 - 2009  (Rear)
Ram 1500 1/2 Ton:  2001 - 2009  (Rear)
Ram Van 1500 1/2 Ton:  2001 - 2003  (Rear)
Ram Van 2500 3/4 Ton:  2001 - 2003  (Rear)

SPECIFICATIONS:

• RG DIAMETER 9.25"
• PINION DIAMETER 1.876" 29 SPLINES
• CASE: 2.71 & NUMERICALLY HIGHER
  Ring Gear Diameter:  9.250
  Cover Bolts: • 12 -7/16" X 18 LH THREADED BOLTS
  Ring Gear Bolts:  12
AXLE  Spline Count:  31
  Rear Suspension:  Solid
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
CHRYSLER® 10.5” 14 BOLT REAR STYLE

 DODGE® RAM P/U 2003-ON
2500 & 3500 SERIES
Power Wagon:  2005 - 2011 (Rear)
Ram 1500 1/2 Ton:  2006 - 2011  (Rear)
Ram 1500 1/2 Ton:  2006 - 2011  (Rear)
Ram 2500 3/4 Ton:  2003 - 2011  (Rear)
Ram 2500 3/4 Ton:  2003 - 2011  (Rear)
Ram Van 2500 3/4 Ton:  2003 - 2011  (Rear)


Chrysler 10.5" commonly found in late model Dodge trucks with a Hemi or gas engine.

SPECIFICATIONS:

• 14 BOLT COVER
• RG DIAMETER 10.5”
•
• PINION DIAMETER 1.75" 30 SPLINES
• CASE: NO CASE BREAKS

  Ring Gear Bolts: 12 --M14X1.5 LH THREADED BOLTS
  AXLE Spline Count:  30
  Rear Suspension:  Solid

CHRYSLER® 11.5” 14 BOLT REAR STYLE

 DODGE® RAM P/U 2003-ON
3500 SERIES

Ram 2500 3/4 Ton:  2003 - 2011  (Rear)
Ram 2500 3/4 Ton:  2003 - 2011  (Rear)
Ram 3500 1 Ton:  2003 - 2011  (Rear)
Ram 3500 1 Ton:  2003 - 2011  (Rear)
Ram Van 2500 3/4 Ton:  2003 - 2011  (Rear)

14 bolt rear cover, full floating rear end common in late model Dodge trucks with diesel engines.

SPECIFICATIONS:
• 14 BOLT COVER
• RG DIAMETER 11.5”

• PINION DIAMETER 2" 30 SPLINES

  Ring Gear Bolts:  12 M14 X1.5 LH THREADED BOLTS
  AXLE Spline Count:  30
  CASE: NO CASE BREAKS
  Rear Suspension:  Solid
  Pinion Nut Size:  36mm
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
Gasket Differential/Axle Type Application DESCRIPTION

    DANA SPICER M30
   (Standard)

American Motors
80-87 1/2 Eagle (Front)
International
68-75 Scout (Front)
Jeep
72-86 CJ (Front)
72 & 73 Jeepster (Front)
72 & 73 Wagoneer (Front)
93-96 Grand Cherokee ZJ (Front)
Ford
85-89 Aerostar (Rear)
65-71 Bronco (Front)
DESCRIPTIONSOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M30
   (Reverse)

Jeep
87-96 Wrangler (Front)
87-99 Cherokee XJ (Front)

    DANA SPICER M30
    JEEP TJ

Jeep
97-06 Wrangler (Front)
96-06 Grand Cherokee ZJ, WJ (Front)
99-06 Cherokee XJ (Front)
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M30
    JEEP JK

Jeep
07-UP Wrangler JK

    DANA SPICER M35
    (Standard)

Jeep (Rear)
84-Up Cherokee
84-92 Comanche
87-06 Wrangler
93-Up Grand Cherokee
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M35
    (Reverse)

Ford (Front)90 1/2-95 Explorer (4.0L)90 1/2-97 Ranger (4.0L)Mercury (Front)90-95 1/2 MountineerMazda (Front)90-97 B4000

    DANA SPICER M44
    (Standard)

Dodge
69-UP 1/2, 3/4 Ton (Front)
International
67-80 Scout (Front & Rear)
Jeep
72-86 Jeep CJ5 (Rear)
74-84 Jeep J10, J20 (Front & Rear)
03-Up Wrangler TJ (Front & Rear)
Ford
67-77 Bronco, 1/2, 3/4 Ton (Front)
Chevrolet
69-UP 1/2, 3/4 Ton (Front)
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M44
    (Reverse)

Ford
79-86 Bronco, F150 (Front)
79-Up 1/2, 3/4 Ton (Front)
Dodge
69-Up 1/2, 3/4 Ton (Front)

    DANA SPICER M44
    HD (Aluminum)

Chevrolet
86-96 Corvette
Dodge
92-06 Viper  
Jeep
96-04 Grand Cherokee/WJ   
96-99 Jeep ZJ  
Isuzu
98-04 Rodeo


SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M44
    TJ RUBICON

Jeep Rubicon
03-06 (Front & Rear)

    DANA SPICER M44
    JK RUBICON

Jeep Rubicon
07-Up Wrangler (Front and Rear)

    DANA SPICER M50
    (Reverse)

Ford80-Up F250, F350
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M60
    (Standard)

Chevrolet/GMC
65-91 (Rear)
77-87 (Front)
Chrysler
69-Up (Rear)
75-Up (Front)
Ford
68-85 (Rear)
68-Up Van

    DANA SPICER M60
    (Reverse)

Ford
78-Up F250, F350
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    DANA SPICER M70

Dodge
85-99 3/4 Ton
Ford
83-Up F250 (Rare)
Chevrolet
73-97 3/4 & 1 Ton (Rare)

    DANA SPICER M80

Dodge
94-01 2500 & 3500
Ford
92-08 F450
GM
92-08 P Series
Gasket Differential/Axle Type Application DESCRIPTION

    FORD 7.5

Ford
79-Up Mustang
79-Up Passenger Car
83-91Bronco II
83-UP Ranger
86-97 Aerostar Van

    FORD 8

     REAR

Ford75-78 Bobcat and Fairmont 64-72Comet 67-79 Cougar 64-70 Falcon  75-79 Granada 71-79 Maverick  64-78 Mustang71-80 Pinto 64-78 Ranchero 71-74 Torino/Grand Torino 78-79 Zephyr
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    FORD 8.8
    (Standard)

       REAR

Ford
79-Up Mustang
82-Up Passenger Car
83-Up Bronco, F150, E150
87-90 F250, E250
90 1/2-Up Explorer, Ranger (4.0L)
97-Up Expedition, F150 (4.6L)

Bronco:  1983 - 1996  (Rear)
Bronco II:  1984 - 1990  (Rear)
Bronco II:  1984 - 1990  (Rear)
Capri:  1979 - 1986  (Rear)
Continental:  1979 - 2000  (Rear)
Cougar:  1979 - 1997  (Rear)
Crown Victoria:  1983 - 2011  (Rear)
E-100 1/2 Ton:  1983 - 1983  (Rear)
E-150 1/2 Ton:  1983 - 2010  (Rear)
Fairmont:  1978 - 1983  (Rear)
Granada:  1979 - 1982  (Rear)
Grand Marquis:  1975 - 2011  (Rear)
LTD:  1983 - 1991  (Rear)
Mark VI:  1980 - 1983  (Rear)
Mark Vll:  1984 - 1992  (Rear)
Mountaineer:  1997 - 2010  (Rear)
Mountaineer:  1997 - 2010  (Rear)
Mountaineer:  2002 - 2010  (Rear)
Ranger:  1990 - 2011  (Rear)
Ranger:  1990 - 2011  (Rear)
Thunderbird:  1984 - 1995  (Rear)
Town Car:  1981 - 2011  (Rear)
Ford 8.8
  Ring Gear Diameter:  8.800
  Cover Bolts:  10
  Ring Gear Bolts:  10
  10 7/16" X 20 RH THREADED BOLTS
  PINION DIAMETER 1.626" 30 SPLINES
  Carrier Breaks:  none
  Rear Suspension:  
  Pinion Nut Size:  1-1/16
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    FORD 8.8 IFS
    (Reverse)

      FRONT

Ford
97-Up F150, Expedition

viator:  2003 - 2005  (Front)
Aviator:  2003 - 2005  (Front)
Expedition:  1997 - 2009  (Front)
F-150 1/2 Ton:  1997 - 2011  (Front)
F-250 3/4 Ton:  1997 - 1999  (Front)
Navigator:  1998 - 2009  (Front)

Ford 8.8" Reverse Front
  Ring Gear Diameter:  8.800
  Cover Bolts:  10
  Ring Gear Bolts:  10
  10 7/16" X 20 RH THREADED BOLTS
  PINION DIAMETER 1.626" 30 SPLINES
  Carrier Breaks:  none
  Rear Suspension:  
  Pinion Nut Size:  1-1/16

    FORD 9

Ford
57-78 Full Size
57-88 E100, E150
57-88 F100, F150
67-86 Bronco
68-74 E200
57-80 Passenger Cars

Comet:  1964 - 1977  (Rear)
Cougar:  1967 - 1979  (Rear)
E200 3/4 Ton:  1968 - 1974  (Rear)
Fairlane:  1957 - 1971  (Rear)
Falcon:  1960 - 1970  (Rear)
Galaxie:  1959 - 1974  (Rear)
Granada:  1975 - 1979  (Rear)
Grand Marquis:  1975 - 1980  (Rear)
LTD:  1965 - 1979  (Rear)
Mark III:  1968 - 1971  (Rear)
Maverick:  1970 - 1978  (Rear)
Mustang:  1965 - 1973  (Rear)
Ranchero:  1957 - 1979  (Rear)
Thunderbird:  1955 - 1979  (Rear)
Torino / Grand Torino:  1968 - 1976  (Rear)

SPECIFICATIONS:
• 10 BOLT 3RD MEMBER
• ALUM. OR STEEL HOUSING
• RG DIAMETER 9"
• 10 7/16" X 20 RH THREADED BOLTS
• PINION DIAMETER 1.313" 28 SPLINES SP
• PINION DIAMETER 1.500” 35 SPLINES BP
• NO CASE BREAKS
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/16
  AXLE Spline Count:  28 or 31
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    FORD 9.75

Ford
97-UP Expedition (5.4L)
97-Up F150 (5.4L)

EXPEDITION 97-ON
E150 97-ON
E250 97-ON
E350 97-ON
F150 97-ON
FORD® 1/2 TON 97-ON
FORD® 3/4 TON 97-ON
NAVIGATOR 97-ON		  Ring Gear Diameter:  9.750
  Cover Bolts:  12
  Ring Gear Bolts:  12-12MM X 26 RH THREADED BOLTS
  AXLE Spline Count:  34
  PINION DIAMETER 1.970 31 SPLINES
 
   NO Carrier Breaks
  Rear Suspension:  Solid

    FORD 10.25

Ford
83-92 F250, F350 F450
93-98 F250, F350 F450

E-250 3/4 Ton:  1983 - 1998  (Rear)
E-250 3/4 Ton:  2004 - 2005  (Rear)
E-350 1 Ton:  1983 - 1998  (Rear)
F-250 3/4 Ton:  1983 - 1998  (Rear)
F-250 3/4 Ton:  1983- 1998  (Rear)
F-250 Super Duty 3/4 Ton:  1997 - 1999  (Rear)
F-250 Super Duty 3/4 Ton:  2004 - 2005  (Rear)
F-350 1 Ton:  1983 - 1997  (Rear)
F-350 1 Ton:  1983 - 1997  (Rear)
F-350 Super Duty 1 Ton:  1997 - 1999  (Rear)
F-350 Super Duty 1 Ton:  1997 - 1999  (Rear)

Ford 10.25"
  Ring Gear Diameter:  10.250
  Cover Bolts:  12
  Ring Gear Bolts:  12-1/2 X 20 RH THREADED BOLTS
  AXLE Spline Count:  35
  PINION DIAMETER 1.940” 31 SPLINE
 
  Carrier Breaks:  none
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    FORD 10.5 REAR

Ford
EXCURSION 2000-ON
FORD® F350-450 99-2002
FORD® 3/4 TON 99-ON
FORD® 1 TON 99-ON

E-450:  2000 - UP  (Rear) E-550:  2002 - 2003  (Rear) 		Ford 10.5", 99-up
   Ring Gear Diameter:  10.500
  Cover Bolts:  12
  Ring Gear Bolts:  •12-1/2 X 20 RH THREADED BOLTS
  AXLE Spline Count:  35
  • PINION DIAMETER 1.940” 31 SPLINE
  Carrier Breaks:  none
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8
Gasket Differential/Axle Type
Application
 DESCRIPTION

    GM 7.25 IFS          FRONT
    (Reverse)

Chevrolet
83-Up S10, S15 (Front)
83-Up Astro Van
83-Up All-Wheel Drive

  Ring Gear Diameter:  7.250
  Cover Bolts:  
  Ring Gear Bolts:  10
  Spline Count:  26
  Dropout: 
  Carrier Breaks:  3.08 / 3.42
  FRONT Suspension:  
  Pinion Nut Size:  1-1/4
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

GM 7.5 & 7.625    REAR    

Chevrolet
77-Up Full Size Trucks
76-Up Passsenger Cars
82-Up Camaro
82-Up S10, S15

 Ring Gear Diameter:  7.500 & 7.6
  Cover Bolts:  10
  Ring Gear Bolts:  10
  Spline Count:  28
   Carrier Breaks:  3.08 / 3.23
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/4

GM 7.60” IFSMODEL# YEAR
MID-SIZE TRUCKS 4WD 2004-ON

Compatible with Models:

Canyon:  2004 - 2011  (Front)
Colorado:  2004 - 2011  (Front)
H3:  2005 - 2010  (Front)
GM 7.60” IFS FRONT STYLE
SPECIFICATIONS:
• 10 BOLT COVER
• RG DIAMETER 7.60”
• 10- 7/16” X 20 RH THREADED BOLTS
• PINION DIAMETER 1.438” 28 SPLINES
• CASES: NO CASE BREAK
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
GM 7.75" Borg Warner rear Camaro:  1985 - 1993  (Rear) Firebird:  1985 - 1993  (Rear)   Ring Gear Diameter:  7.750
  Cover Bolts:  9
  Ring Gear Bolts:  10
  Spline Count:  28
    Carrier Breaks:  2.77 / 3.27
  Rear Suspension:  
  Pinion Nut Size:  1-1/8
GM 8.0" REAR

Compatible with Models:

Bravada:  2000 - 2004  (Rear)
Canyon:  2004 - 2011  (Rear)
Canyon:  2004 - 2011  (Rear)
Colorado:  2004 - 2011  (Rear)
Colorado:  2004 - 2011  (Rear)
Envoy:  2002 - 2009  (Rear)
H3:  2005 - 2010  (Rear)
Rainier:  2004 - 2007  (Rear)
Rainier:  2004 - 2007  (Rear)
Trailblazer:  2001 - 2008  (Rear)
Trailblazer:  2001 - 2009  (Rear)
10 bolt rear cover with 8" ring gear. Has 28 spline c/clip axles.   Ring Gear Diameter:  8.000
  Cover Bolts:  10
  Ring Gear Bolts:  10
  Spline Count:  28
   Carrier Breaks:  3.08 / 3.31
  Rear Suspension:  
  Pinion Nut Size:  1-1/4
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    GM 8.2

Chevrolet
67-69 Camaro
65-72 Impala
64-72 Nova, Chevy II
64-72 Chevelle, El Camino
70-72 Monte Carlo
65-71 Caprice

  Ring Gear Diameter:  8.200
  Cover Bolts:  10
  Ring Gear Bolts:  10
  Spline Count:  28
  Carrier Breaks:  2.76 / 3.07
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8

GM 8.2" Rear for Buick, Oldsmobile & Pontiac
442:  1964 - 1972  (Rear)
Bonneville:  1964 - 1972  (Rear)
Catalina:  1964 - 1972  (Rear)
Cutlas:  1964 - 1972  (Rear)
Firebird:  1967 - 1972  (Rear)
Grand Prix:  1964 - 1972  (Rear)
GTO:  1964 - 1972  (Rear)
LeMans:  1965 - 1972  (Rear)
Skylark:  1964 - 1969  (Rear)
Tempest:  1964 - 1970  (Rear)
Trans Am:  1969 - 1972  (Rear)

GM 8.2" Rear for Buick, Oldsmobile & Pontiac. Uses pressed on axle bearings and bolt in axles rather than c/clips.
  Ring Gear Diameter:  8.200
  Cover Bolts:  10
  Ring Gear Bolts:  10
  Spline Count:  28
  Carrier Breaks:  3.23 / 3.55
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/4
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

    GM 8.25 IFS         FRONT
    (Reverse)

Chevrolet (Front)
88-Up Chevy 1/2, 3/4 Ton
92-Up Blazer, Suburban
92-Up Tahoe

GM 8.25" IFS Front, '98 & older. Aluminum front housing found in GM vehicles. Uses 8.25" reverse cut ring gear.
  Ring Gear Diameter:  8.250
  Cover Bolts:  
  Ring Gear Bolts:  10
  Spline Count:  28
  Dropout:  
  Carrier Breaks:  none
  Rear Suspension:  
  Pinion Nut Size:  1-1/4
GM 8.5" Front - 28 &30 Spline
Blazer:  1977 - 1999  (Front)
K10/ K1500 1/2 Ton (4WD):  1977 - 1999  (Front)
K15/ K1500 1/2 Ton (4WD):  1977 - 1999  (Front)
K20/K2500 3/4 Ton (4WD):  1977 - 1999  (Front)
K25/ K2500 3/4 Ton (4WD):  1977 - 1999  (Front)
K5 Blazer (4WD):  1977 - 1999  (Front)
Suburban 1/2 Ton:  1977 - 1999  (Front)
Suburban 1/2 Ton:  1977 - 1999  (Front)
Suburban 3/4 Ton:  1977 - 1999  (Front)
Suburban 3/4 Ton:  1977 - 1999  (Front)

8.5" Front differential with 28 or 30 spline inner axles.
   Ring Gear
 * Diameter:  8.500
  Cover Bolts:  10
Ring Gear Bolts:  10
7/16" x 20 LH THREADED BOLTS
 Spline Count:  28 & 30
  Carrier Breaks:  2.56 / 2.73
  FRONT Suspension:  
  Pinion Nut Size:  1-1/4
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET


GM 8.5 & 8.6 REAR 28 & 30 SPLINE		APOLLO/REGAL
CENTURY 73-77
BISCAYNE/
ROADMASTER 71-74
BUICK® FULL SIZE 71-96
CAMARO 70-81
CHEVELLE 70-76
CHEVY® FULL SIZE 71-96
CHEVY® II / NOVA 70/79
CUTLASS/GRAND PRIX
LEMANS/GTO/VENTURA/
PHOENIX 71-77
EL CAMINO 71-77
ELECTRA 73-78
GTO/FIRDBIRD/
TRANS AM 70-81
GRAND NATIONAL 84-87
GRAND SPORT 73-84
HURST OLDS® 85-88
IMPALA ROADMASTER 91-96
LESABRE 73-74
OLDSV 71-92
OLDS® F-85 70-76
OMEGA 73-79
MONTE CARLO 71-83
PONTIAC® FULL SIZE 71-89
SKYLARK / GS 71-79
Z-28 72-81
BLAZER FRONT/
REAR 77-91
C10/C15/G10/G15 78-ON
G20/G25 79-ON
GM® 1/2 TON (F) 77-91
GM® 1/2 TON (R) 71-ON
GM® 1/2 TON W/POSI (R) 70-99
GM® 3/4 TON (F) 77-99
GM® 3/4 TON (R) 79-95
GM® 3/4 TON W/POSI (R) 77-99
K10 -K15-K20-K26
FRONT 77-87
K10-K15 REAR 82-ON		SPECIFICATIONS:
  Ring Gear Diameter:  8.500 & 8.60
  Cover Bolts:  10
  Ring Gear Bolts:  10
  7/16" x 20 LH  
  THREADED BOLTS
  Spline Count:  28 & 30
  Carrier Breaks:  2.56 / 2.73
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/4

GM® CORVETTE® STYLE 1963 - 1979

CORVETTE® 63-79

 SPECIFICATIONS:

• 10 3/8" X 24 RH THREADED BOLTS
• PINION DIAMETER 1.625" 30 SPLINES

Cast Iron drop out found in 1963-1979 Corvettes.
  Ring Gear Diameter:  8.500
  Cover Bolts:  8
  Ring Gear Bolts:  10
  Spline Count:  17
  Dropout
  Carrier Breaks:  2.76 / 3.07 - 3.90 / 4.10
  Rear Suspension:  Independent
  Pinion Nut Size:  1-1/8
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
NO PICTURE
CORVETTE® C5, C6 1997-2005


NOTE:
2006/07 C6 MODEL
WILL FIT: LS2 W/Manual Transmission
WILL NOT FIT: LS2 when using Cooler Pump from Z06
WILL NOT FIT: LS2 W/Automatic Transmission (A6)
WILL NOT FIT: LS7/Z06
Getrag manufactured transaxle style differential found in late model Corvettes
 SPECIFICATIONS:
• R.G. DIAMETER 8.25”
• 10-12MM X 1.25 PITCH 1 3/4 LOW
• PINION DIAMETER 2.535”
• 3.14 & NUMERICALLY HIGHER
• 2.75 & NUMERICALLY LOWER
• TRANSAXLE TYPE

CHEVROLET® 64-72
CHEVY® II 65-72
CHEVELLE 64-72
CAMARO 67-72
EL CAMINO 65-72
FIREBIRD 67-72
GRAND PRIX 70-72
GTO 65-72
IMPALA 65-72
LEMANS 64-72
MONTE CARLO 70-72
NOVA 65-72
OLDS® F85 68-70		GM 12 Bolt Passenger Car

  Ring Gear Diameter:  8.875
  Cover Bolts:  12
  Ring Gear Bolts:  12   3/8" X 24 RH THREADED BOLTS
   PINION DIAMETER 1.625" 30 SPLINES

  Carrier Breaks:  2.76 / 3.07 / 3.90 / 4.10
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

Compatible with Models:

1/2 TON - 3/4 TON TRUCK 64-87

G10, G15 64-87

G20, G25 69-81

K5 Blazer (4WD):  1969 - 1987  (Rear)

K10, K15, C10, C15 64-87

Suburban 1/2 Ton:  1963 - 1987  (Rear)

GM 12 Bolt Truck

   Ring Gear Diameter:  8.875
  Cover Bolts:  12
  Ring Gear Bolts:  12
• 12       3/8" X 24 RH THREADED BOLTS
• PINION DIAMETER 1.438" 30 SPLINES
  Spline Count:  30
  Carrier Breaks:  2.73 / 2.76 / 3.42 / 3.73
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8



GM  HO72  REAR

Compatible with Models:

C20 3/4 Ton (2WD):  1960 - 1972  (Rear)
C25/ C2500 3/4 Ton (2WD):  1960 - 1972  (Rear)
C35/ C3500 1 Ton (2WD):  1960 - 1972  (Rear)
Suburban 3/4 Ton:  1960 - 1972  (Rear)
Suburban 3/4 Ton:  1960 - 1972  (Rear)

GM 12.25" HO72 Rear, Ball Pinion Bearing for non-load bolt design

   Ring Gear Diameter:  10.120
  Cover NONE  
  Ring Gear Bolts:  12
  Spline Count:  17
  Dropout:3RD MEMBER
  Pinion Support BEARING
  Carrier Breaks:  none
  Rear Suspension:  Solid
  
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
GM  P55   REAR


Compatible with Models:

Bel Air:  1955 - 1964  (Rear)
Biscayne:  1958 - 1964  (Rear)
Corvette:  1956 - 1962  (Rear)
El Camino:  1959 - 1964  (Rear)
Impala:  1957 - 1964  (Rear)
Nomad:  1955 - 1962  (Rear)
Nova:  1962 - 1964  (Rear)
Drop out style rear end with no removable pinion support.
Uses bolt in axles. Has 8.2" ring gear. Ring Gear Bolts:

   Ring Gear Diameter:  8.400
  Cover Bolts:  (10) 3/8 x 24 RH
  Ring Gear Bolts:  10
  Spline Count:  17
  Dropout 3RD MEMBER
  Pinion Support: 
  Carrier Breaks:  3.73 / 4.10
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8



GM  55T   REAR TRUCK

Compatible with Models:

Apache:  1955 - 1960  (Rear)
C10 1/2 Ton (2WD):  1960 - 1964  (Rear)
C15/ C1500 1/2 Ton (2WD):  1960 - 1964  (Rear)
G15/ G1500 1/2 Ton:  1960 - 1964  (Rear)
K10/ K1500 1/2 Ton (4WD):  1960 - 1964  (Rear)
K15/ K1500 1/2 Ton (4WD):  1960 - 1964  (Rear)
Suburban 1/2 Ton:  1960 - 1964  (Rear)
Suburban 1/2 Ton:  1960 - 1964  (Rear)
Suburban 1/2 Ton:  1960 - 1964  (Rear)
Drops out the front of the housing in addition to having a 12 bolt rear cover. Uses c/clip axles.

   Ring Gear Diameter:  9.375
  Cover Bolts:  12
  Ring Gear Bolts:   (12) 3/8 x 24 RH
  Spline Count:  17
  Dropout:  3rd member
  Pinion Support:none
  Carrier Breaks:  None
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/8
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

10-3/16" X 11-3/16"10 HOLES ROUND
GM 9.25 IFS FRONT
 K2500 / K3500 1988-ON
3/4 TON 98-ON
1 TON 88-ON
 SPECIFICATIONS:
• RG DIAMETER 9.25”
• 12 MM X 1.5 LH THREADED BOLTS
• PINION DIAMETER 1.438" 30 SPLINES
• CASES: NO CASE BREAKS
GM 9.25" IFS Front.   Ring Gear Diameter:  9.250
 
  Ring Gear Bolts:  12
  Spline Count:  33 AXLE

  Pinion Nut Size:  1-1/4


GM® 9.50” 14 BOLT STYLE - REAR		C10, C15, C20 88-ON
C30, C35 83-ON
K10, K15 88-ON
K20, K25 81-ON
K30, K35 89-ON
1/2 TON 88-ON
3/4 TON 81-ON
1 TON 83-95		GM 9.5" Rear, '79-'UP. 14 bolt rear with 9.5" ring gear.  No removable pinion support on the front.



   Ring Gear Diameter:  9.500
  Cover Bolts:  14
  Ring Gear Bolts:  12    12MM X 1.50" LH THREADED BOLTS
   PINION DIAMETER 1.876 30 SPLINES
  Has 33 spline c/clip axles.
  Carrier Breaks:  none
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/4
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

GM 10.5  REAR
3/4 TON 73-ON
1 TON 72-ON		GM 10.5" 14 Bolt Truck, '99 & up

  Ring Gear Diameter:  10.500
  Cover Bolts:  14
  Ring Gear Bolts:  12     9/16" X 18 RH THREADED BOLTS
  AXLE Spline Count:  30
 PINION DIAMETER 1.750" 30 SPLINES
  Pinion Support: BEARING
  Carrier Breaks:  4.10 / 4.56
  Rear Suspension:  Solid
  Pinion Nut Size:  1-1/2


GM 11.5 REAR
 C/K TRUCK
G VAN, P TRUCK

1 TON ALL 2001-ON
 SPECIFICATIONS:
• RG DIAMETER 11.5”
• 12 9/16 X 18 RH THREADED BOLTS
• PINION DIAMETER 2.005” 30 SPLINES
• CASES: 4.10 & NUMERICALLY LOWER
4.63 & NUMERICALLY HIGHER
GM 11.5"
  Ring Gear Diameter:  11.500
  Cover Bolts:  14
  Ring Gear Bolts:  12
  Rear Suspension:  Solid
  Pinion Nut Size:  36mm

TOYOTA
TOYOTA® 7.5” IFS STYLE



4 CYL & V6
4Runner:  1986 - 1994  (Front)
Hilux Pickup:  1986 - 1997  (Front)
Pickup:  1986 - 1995  (Front)
T100:  1993 - 1998  (Front)

T411IFS
SPECIFICATIONS:
• RG DIAMETER 7.5"
• Ring Gear Bolts 10-11mm x 1” RH THREADED BOLTS
• PINION DIAMETER 1.3785" 23 SPLINES
• CASES: NO CASE BREAKS
 
Third Member Style  IFS Front

SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
TOYOTA® 7.8” 8.0" STYLE


 1969-1987 4X4 TRUCK
4 CYL. NON-TURBO

4Runner:  1984 - 1995  (Rear)
4Runner:  1984 - 1995  (Rear)
Hilux Pickup:  1986 - 1997  (Rear)
Pickup:  1986 - 1995  (Rear)


T411
 SPECIFICATIONS:
• RG DIAMETER 7.8"
• 10--Ring Gear Bolts 11mm x 1”  RH THREADED BOLTS
• PINION DIAMETER 1.3785" 27 SPLINES
• CASES: NO CASE BREAKS
• 10 BOLT 3rd MEMBER
  Pinion Nut Size:  30mm
   AXLE Spline Count:  30
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET
TOYOTA® 7.8” V6 AND TURBO STYLE
Toyota 8" V6 Rear.

TOYOTA® P/U - 4 RUNNER
4 CYL. TURBO, V6 87-95

T411V6

4Runner:  1985 - 2011  (Rear)
4Runner:  1985 - 2011  (Rear)
Hilux Pickup:  1985 - 1997  (Rear)
Hilux Pickup:  1985 - 1997  (Rear)
Pickup:  1986 - 1995  (Rear)
Pickup:  1986 - 1995  (Rear)
Tacoma:  1995 - 2011  (Rear)
Tacoma:  1995 - 2011  (Rear)

SPECIFICATIONS:   Toyota 8" V6 Rear.
• RG DIAMETER 7.8"
  Ring Gear Diameter:  8.000
• 10 - 11 X 1.00MM RH THREADED BOLTS
• PINION DIAMETER 1.3785" 27 SPLINES
• CASES: NO CASE BREAKS
•10 BOLT 3RD MEMBER
   AXLE Spline Count:  30
  Dropout: 3RD MEMBER
  Rear Suspension:  Solid
  Pinion Nut Size:  30mm
SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET

SOUTHWESTFOURWHEELDIRVE.COM    1-800-653-5918   SW4X4@COX.NET